400V Cylindrical Power Capacitor

1.400V Cylindrical Power Capacitor 2.Long life and safety 3.Low loss 4.Reasonable price with high-quality 5.Certificate ISO

 

400V Cylindrical Power Capacitor

Standard	IEC60831,GB/T12747-2004
ISO approval	ISO 9001 certified(2000)
Rated Voltage Range	250-690 VAC
Capacitance Range	5-40 Kvar
Type	Dry capacitor
Dielectric	Metalized polyprolilene film
Protection	Self protection
Shape	Cylindrical shape
Phase	3 phases or Single phase
Frequency	50/60 HZ
Tolerance	±5%
Operating Temperature	-25 °C--50°C
Over Voltage Allowed	10%--30%
Over Current  Allowed	30%
Dielectric Loss	≤2 W / Kvar
Voltage between terminals	215% under 10 second Voltage

   

ADVANTAGES:

1. Rust-proof  tinplate capacitor case.

2. Advanced equipment:

 *Using the world's most advanced Switzerland (Mai Tana) automatic roll winding machine to wind the polyprolilene film.

*Using the computer controlled metal spraying machine from Itally to spray the metal powder.

 * Each capacitor's technique data is selected and managed by computer.

3. Vacuum casting technology: special protective medium filled in capacitor, not leak, security and environmental; to avoid environmental pollution, fire and other risks

4. Self-healing: excellent self-healing capability can self-repair quickly and renew to working when over pressure destroy the part of medium.

5. Security installation :( Patented)over pressure snap can prevent capacitor to bring accident when close to use life or capacitor’s over heat.

6. new type, security and dependable terminal lead connect more convenience, Perdue design prevent accidental touch, unique structure.

* Capacitor’s terminal predigest the Parallel application form

* Prevent tip-and-run protection

* Building-in discharge resistance and safety installation, the use of safe and reliable

* Cable’s cross section can up to 16mm216mm2

7.protion device

 

Working conditions:

 1. Power capacitor should confirm left voltage reduce to rated voltage 10% to input again after the power was cut off ,normally it will need 200s almost. so it would choose the power controller which has input and reput lock time function after cut off the power. If choose normally power controller, it must install speediness discharge power equipment .it would not limited which use adopting same electric factor input and chip switch.

2. Altitude level is not more than 2000m.

3. Temperature type: -25/C low temperature, highest temperature is C type (it would not more than 50 the average of temperature is not more than 40 within 24 hours, one year average of temperature is not more than 30 ),power capacitor will work within good ventilate condition. It would not permit within sealing and installation condition

Payment: T/T L/C, Western Union and so on. Min order: normal is 5pcs(on required)